How to Care for a Fiberglass Pool in High-Use Periods

Swimming Pools Blog

<<
How to Take Care of Your Fiberglass Pool |
How to Maintain Water Balance in a Fiberglass Pool |
How Often Do You Need to Brush a Fiberglass Pool?
>>

During high-use periods, your fiberglass pool requires extra attention to maintain its cleanliness, safety, and overall condition. Whether you own an affordable fiberglass pool or a luxury model, following these care tips will ensure your pool remains in top shape even with frequent use. If you’re planning a project, learn more about
DIY Fiberglass Pool Shells.

Regular Cleaning and Maintenance

1. Skim and Vacuum Daily: In high-use periods, debris such as leaves, dirt, and bugs can accumulate quickly. Skim the surface of your pool daily and vacuum the bottom to keep it clean.

2. Brush the Pool Walls: Brush the pool walls and floor at least once a week to prevent algae buildup and maintain the smooth finish of custom fiberglass pools.

3. Empty the Skimmer and Pump Baskets: Check and empty the skimmer and pump baskets regularly to ensure proper water flow and filtration. This is crucial for inground fiberglass pools to keep the system running efficiently.

Water Chemistry Management

1. Test the Water Frequently: High bather loads can quickly alter the water chemistry. Test the water at least twice a week to monitor pH, chlorine, and alkalinity levels.

  • Tip: Maintain pH levels between 7.2 and 7.8 to protect the best fiberglass pool shells from corrosion and scaling.

2. Adjust Chlorine Levels: With more people using the pool, chlorine levels can drop rapidly. Adjust the chlorine levels to maintain a concentration of 1-3 ppm (parts per million) to keep the water sanitized.

  • Tip: For luxury fiberglass pools, consider using a chlorine stabilizer to prolong the effectiveness of chlorine in sunny conditions.

3. Balance Alkalinity: Ensure the total alkalinity is within the range of 80-120 ppm. Proper alkalinity levels help stabilize pH and prevent fluctuations, which is important for custom pool shells.

Equipment Maintenance

1. Run the Pool Pump Longer: Increase the running time of your pool pump to ensure adequate water circulation and filtration during high-use periods. This helps maintain water clarity in fiberglass pools.

2. Clean the Filter: Backwash or clean the filter more frequently to remove accumulated debris and maintain optimal filtration efficiency. This is especially important for inground fiberglass pools.

3. Inspect Pool Equipment: Regularly inspect all pool equipment, including the pump, heater, and chlorinator, to ensure they are functioning properly. Address any issues promptly to avoid breakdowns during peak usage. If you’re installing a new pool, follow our guide on
How to Install a Fiberglass Pool Shell.

Preventive Measures

1. Encourage Showering Before Swimming: Encourage swimmers to shower before entering the pool to reduce the introduction of oils, lotions, and other contaminants. This helps keep the water cleaner and reduces the load on your filtration system.

2. Limit Food and Drinks Near the Pool: Minimize food and drinks around the pool area to prevent spills and debris from entering the water. This is a good practice for both affordable fiberglass pools and luxury models.

3. Use a Pool Cover: When the pool is not in use, cover it to keep debris out and reduce evaporation. This helps maintain water quality and reduces maintenance efforts for fiberglass pools. For colder months, consider
Inground Pool Winter Safety Covers.

Tips for Managing High Bather Loads

1. Shock the Pool: Perform a shock treatment weekly or after heavy use to eliminate contaminants and restore water clarity. This is crucial for maintaining custom fiberglass pools in peak condition.

2. Add Algaecide: Use an algaecide regularly to prevent algae growth, especially during high-use periods. This is particularly beneficial for pool shells, where warmer weather can promote algae proliferation.

3. Monitor Water Level: High bather loads can cause water levels to drop. Keep an eye on the water level and refill as necessary to ensure proper skimming and filtration.

Conclusion

Caring for your fiberglass pool during high-use periods requires diligent maintenance and proactive measures. By following these tips, you can ensure your pool remains clean, safe, and enjoyable for everyone. Whether you own an affordable fiberglass pool or a luxury model, proper care and maintenance will extend the life of your pool and enhance your swimming experience.

For homeowners who prefer a turnkey solution, explore our
Full-Service Pool Installation.
For more information on maintaining your pool and finding the best fiberglass pool shells, visit our website and explore our range of custom fiberglass pools and pool shells to suit your needs.